The main body container usually has a plastic bottle, a […]
The main body container usually has a plastic bottle, a glass bottle, a hose, and a vacuum bottle. Auxiliary materials usually include: color box, box, middle box
1.The material of plastic bottles is usually PP, PE, K material, AS, ABS, acrylic, PET, etc.
2.usually used for cosmetic containers, thicker cream bottles, caps, stoppers, gaskets, pump heads, dustproof for injection molding; PET blowing bottles for two-step molding, tube blank for injection molding, finished packaging For blowing bottles. Other emulsion bottles such as thinner containers and washing bottles are blown bottles.
3.PET materials are environmentally friendly materials, with high barrier properties, light weight, non-breaking characteristics, chemical resistance, strong transparency, can be made of pearlescent, colored, magnetic white, transparent, widely used in the installation of gel water. The bottle mouth is generally standard 16#, 18#, 22#, 24# caliber, and can be used with the pump head.
4.acrylic material for injection molding bottles, chemical resistance is poor, generally can not directly install the sound body, need to be equipped with inner Yang Yang, filling is not too full, to prevent the paste from entering between the liner and the acrylic bottle In order to avoid cracking, the packaging requirements are higher during transportation, it is particularly obvious after scratching, the permeability is high, and the upper wall is very thick, but the price is quite expensive.
5.AS, ABS: AS transparency is better than ABS, and the toughness is better.
6.Mold development cost: The blowing mold is 1500 yuan to 4,000 yuan, and the injection mold is 8,000 yuan to 20,000 yuan. The material of the stainless steel for the mold is more expensive than the aluminum alloy material, but it is durable, and the mold is a few times. The demand for production, such as the large production volume, can choose a mold that is four or one out of six, and the customer can decide at their own discretion.
7.the order quantity is generally 3,000-10,000, can be customized color, usually do primary color matte and magnetic white, or add pearl powder effect, the same color masterbatch with the bottle and cover, but sometimes due to the bottle and cover The materials used are different, and the colors are a little poor.
8.silk screen has ordinary ink and UV ink, UV ink effect is good, shiny and three-dimensional sense, in the production should first check the color of the plate, the silk screen effect will be different in different materials.